Forum


Post new topic Reply to topic  [ 21 posts ]  Go to page 1, 2  Next
Author Message
 Post subject: Hope Bottom bracket
PostPosted: Wed Dec 28, 2016 7:42 pm 
Posts: 55
My bike has a power spline type bb and it's starting to grind a little. So will soon be doing my first big upgrade. New crankset and bb. The reviews seem very positive for the hope bb is it money well spent in the long run, costs three times more than some but would it last three time longer? Nearly 4 months and bits are starting to wear out :?


Top
 Profile  
 
 Post subject: Re: Hope Bottom bracket
PostPosted: Thu Dec 29, 2016 11:39 am 
User avatar
Posts: 5060
Personal opinion no, BB's wear out at this time of year in all the wetness etc.
Do you need a whole chrankset or just the BB?
Look at Uber components or any of the other quality suppliers, with Hope you are paying a lot for the name but it is a good product, just not 3 times better.

--------------------------------------
Bike piccys!
http://tinyurl.com/okyhpdg


Top
 Profile  
 
 Post subject: Re: Hope Bottom bracket
PostPosted: Thu Dec 29, 2016 3:23 pm 
Posts: 55
VW-surfbum wrote:
Personal opinion no, BB's wear out at this time of year in all the wetness etc.
Do you need a whole chrankset or just the BB?
Look at Uber components or any of the other quality suppliers, with Hope you are paying a lot for the name but it is a good product, just not 3 times better.



Hello, I could just replace the bb, nothing wrong with the crank arms but fancy getting a hollow crankset. Seen a direct mount race face one that looks alright. Will take a look at Uber components :thumbup:


Top
 Profile  
 
 Post subject:
PostPosted: Thu Dec 29, 2016 3:38 pm 
User avatar
Posts: 5060
Does it come with a BB, most do?
I'll be selling my SRAM NX crank in the next few days. Uses a GXP BB only bought it in August as I broke my X0 one

Sent from my EVA-L09 using Tapatalk

--------------------------------------
Bike piccys!
http://tinyurl.com/okyhpdg


Top
 Profile  
 
 Post subject: Re: Hope Bottom bracket
PostPosted: Thu Dec 29, 2016 4:03 pm 
Posts: 55
I was planning on getting the crank arms and chain ring separately as the package sets only have 30 or 32 teeth and I want a 34 tooth chainring, no bb supplied. Looked at uber too thanks for that, will be getting a few other bits from them soon.

How much you looking for? Is it direct mount or bolt on? Just the crank arms? What length arms too :thumbup:


Top
 Profile  
 
 Post subject: Re: Hope Bottom bracket
PostPosted: Thu Dec 29, 2016 4:33 pm 
User avatar
Posts: 5060
Its a 32t single ring, not direct mount.
Image
I'll take a picture of my one later this evening if you're interested. £50 as it cost me £90 in Afan.
Trouble is you'd still need a new BB unless you use press fit BB92's?
A Std GXP from Uber are very good.

--------------------------------------
Bike piccys!
http://tinyurl.com/okyhpdg


Top
 Profile  
 
 Post subject: Re: Hope Bottom bracket
PostPosted: Thu Dec 29, 2016 5:03 pm 
Posts: 55
Please do I'm interested, could you confirm the bolt circle please, I've read it's 94mm also the arm length. Would save me a few quid :thumbup:
My bikes set up 1x10 with 34t chainring, what's the difference in two teeth the feel I mean, still very new to all this.


Top
 Profile  
 
 Post subject: Re: Hope Bottom bracket
PostPosted: Thu Dec 29, 2016 5:29 pm 
User avatar
Posts: 5060
Yeah that sounds right, its not the std 104. 32t will give a lower ratio (better for climbing) Arm lengths are 170mm
I'll post a picture ASAP

--------------------------------------
Bike piccys!
http://tinyurl.com/okyhpdg


Top
 Profile  
 
 Post subject: Re: Hope Bottom bracket
PostPosted: Thu Dec 29, 2016 5:56 pm 
Posts: 55
VW-surfbum wrote:
yeah that sounds right, its not the std 104. 32t will give a lower ratio (better for climbing) Arm lengths are 170mm
I'll post a picture ASAP


So I would have to spin my legs a bit quicker to go fast then :crazy: :lol: I can try 32t I may like it..


Top
 Profile  
 
 Post subject: Hope Bottom bracket
PostPosted: Thu Dec 29, 2016 6:22 pm 
User avatar
Posts: 5060
ImageImage

Not cleaned them up and the flash makes them look worn???

Sent from my EVA-L09 using Tapatalk

--------------------------------------
Bike piccys!
http://tinyurl.com/okyhpdg


Top
 Profile  
 
 Post subject: Re: Hope Bottom bracket
PostPosted: Thu Dec 29, 2016 6:54 pm 
Posts: 55
Where do you live? Can you post if needed?


Top
 Profile  
 
 Post subject: Re: Hope Bottom bracket
PostPosted: Thu Dec 29, 2016 7:13 pm 
User avatar
Posts: 5060
Near Danbury but yeah i can post

--------------------------------------
Bike piccys!
http://tinyurl.com/okyhpdg


Top
 Profile  
 
 Post subject: Re: Hope Bottom bracket
PostPosted: Thu Dec 29, 2016 8:35 pm 
Posts: 55
Is that chainring 10 speed compatible?


Top
 Profile  
 
 Post subject:
PostPosted: Thu Dec 29, 2016 8:43 pm 
User avatar
Posts: 5060
I can try it on my new 10 speed chain I can't see it being any different

Sent from my EVA-L09 using Tapatalk

--------------------------------------
Bike piccys!
http://tinyurl.com/okyhpdg


Top
 Profile  
 
 Post subject: Re: Hope Bottom bracket
PostPosted: Thu Dec 29, 2016 9:39 pm 
Posts: 55
If it's £50 posted PM me your Paypal details, cheers


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 21 posts ]  Go to page 1, 2  Next

All times are UTC [ DST ]


Who is online

Users browsing this forum: Bing [Bot], Google [Bot] and 70 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
cron