Forum

2006 Fox TALAS RC2
The lowers are in good nick, no cracks around the pinch bolt area but one of my disc bolts came loose and guaged a chunk out of the lower, it hasn't gone through the lower and has been like that for over a year with no issues.

The sanctions are in good condition

Seals will need replacing and the TALAS cart doesn't work, you have to manually pull the forks up to get full travel but it works going down.

High and Low Speed compression works, so does rebound, just the talas thats not working properly.

Crown is messy, with lotsa of wear from cables

Steerer is very short, will have to measure.

I'm selling these as spares or for repair

£100 posted

Fox Float R Shock
Not sure what year the shock is from but it was on my Turner Rail
165mm i2i
It has been push tuned but I have since removed the decals

Bushings are fitted but might need changing.

All adjusters work

There is a black ring on the shaft after a days use, I'm assuming this is oil but the shock performs faultlessly, infact its the best air shock I have ever ridden, feels progressive and doesn't jsut blow through the travel.



£50 Posted


Shimano Saint Cranks
170mm
68/73mm BB

They have the usual food rub on the crank arms.
They come with the preload bolt and ti pinch bolts.

I'll throw in the E13 chainring which is a 38tooth.

The pedals are not included.

£55 posted

SRAM X9 Rear Mech
Medium Cage
9 Speed

Both in good working condition, just a bit dirty and will clean them up if they are sold.



£25 posted each

Ti Spring
300lbs
Freelength is 145mm

Not sure what the stroke is but I was running it on a 9.5 by 3inch stroke Fox RC without any issues and I was bottoming out the shock.



£50 posted

Hope Seat Clamp
Black
31.8



£5 posted

Hope Disc Brake Rotors
185mm Floating
165mm Floating
185mm Non Floating



£15 posted for the Floating versions and £10 posted for the Non Floating version.


SDG Seat
Bel Air Ti
Ti Rails



£20 posted

SDG I-Beam Seat and Post Combo
Bel Air Seat and Standard I-Beam Post
Seat post is 180mm long and 27.2 in diameter



£25 posted

Raceface D2 Stem
35mm
31.8
Zero degree rise

Few areas around the edges with rub marks othrwise in very good nick.



£20 posted

I need a rear disc, i will check the size and let you know!

HI
Do the cranks come with the bb? Still running an old school one on my patriot!

Hi there, do you have pics of the Forks?, what is the travel?, and finally are they 32's or 36's?

Thanks

I will have floating rotors and rear mech. If available can pay/collect next ride

Sent from custom desire using tapatalk

Sorry should really update this.

The rotors have all sold, the mechs I stil have, I'll bring them both along one is apprently a short the other a medium.

The forks are 36's and I believe they are more knacked than I first thought, the creaking I got could possilbe be a broken CSU, I'm not sure as my new forks are starting to creak but that could be I haven't cleaned them since the wet weather or a headtube problem whioch I doubt it being 1.5.

If you don't want to sell them I'd pay for postage to take them off your hands, as a project.

How long is the steerer tube? 1.5 or 1/18 fitment?